XHB980T-AS
Operating systems
Up to 4 feed axes. Integrated panel, compact and suitable for economic lathes. Servo bus communication. Maximum speed 60 m/min, maximum feed rate 30 m/min. Configurable digital spindle for tapping, positioning, etc. Supports high speed and high precision. Digital spindle threading function, workpiece co-ordinate system function. Tool tip radius compensation, corner arc compensation. Supports pitch compensation to improve machine accuracy. Equipped with SD series bus type servo drive and absolute encoder motor.
XHB980T-AS
Operating systems
Up to 4 feed axes. Integrated panel, compact and suitable for economic lathes. Servo bus communication. Maximum speed 60 m/min, maximum feed rate 30 m/min. Configurable digital spindle for tapping, positioning, etc. Supports high speed and high precision. Digital spindle threading function, workpiece co-ordinate system function. Tool tip radius compensation, corner arc compensation. Supports pitch compensation to improve machine accuracy. Equipped with SD series bus type servo drive and absolute encoder motor.
Description
Up to 4 feed axes.
Integrated panel, compact structure, suitable for economical lathes.
Servo bus communication.
The maximum rapid speed is 60 m/min, and the maximum feed speed is 30 m/min.
Digital spindle can be configured to complete tapping, positioning, etc.
Support high speed and high precision.
It has the function of digital spindle thread and workpiece coordinate system.
It has tool nose radius compensation and corner arc compensation functions.
Support pitch compensation to improve machine tool accuracy.
Equipped with SD series bus servo drive and absolute encoder motor.
Technical Parameters
| project | Specification |
| Number of control axes | Maximum number of control axes: 4 axes |
| Maximum number of linkage axes: 4 axes (linear interpolation), 2 axes (circular interpolation) | |
| Coordinate value (system) and size | Workpiece coordinate system, local coordinate system |
| Coordinate Plane Selection | |
| Position command range: ±99999999×minimum input unit | |
| Absolute/incremental programming, diameter/radius programming, inch/metric conversion, linear axis/rotary axis | |
| preparation function | Contains 61 G commands, including rapid positioning, linear interpolation, circular interpolation, cylindrical interpolation, thread cutting, polar coordinate interpolation, polygon turning, rigid tapping, pause, tool compensation, macro program call, jump, Loop etc. |
| Feed function | Fast moving speed: μ level (IS-B) 0mm/min-60000mm/min 0. 1μ level (IS-C) 0mm/min-24000 mm/min |
| Fast magnification: F0, 25%, 50%, 100% four-level real-time adjustment | |
| Cutting feed rate; μ grade (IS-B) 0mm/min-30000 mm/min 0.1μ grade (IS-C) 0mm/min-24000 mm/min | |
| Feed ratio: 0～150%, a total of 16 levels of real-time adjustment | |
| Rapid traverse/cutting feed acceleration and deceleration: linear, the initial speed, end speed and acceleration and deceleration time of acceleration and deceleration are set by parameters | |
| thread cutting | Thread type: equal pitch straight thread/taper thread/face thread/arc thread, variable pitch straight thread/taper thread/face thread |
| Support multi-thread | |
| Thread pitch: 0.01mm~500mm (metric thread) or 0.06 teeth/inch~2540 teeth/inch (inch thread) | |
| Thread cutting acceleration and deceleration: linear type and exponential type are optional | |
| Thread back-off: the length, angle and speed characteristics of the back-off can be set | |
| Spindle function | Spindle speed: can be given by S code, speed range Orpm ~ 9999rpm |
| Spindle override: 10%~150% real-time adjustment | |
| 2-way 0V~10V analog voltage output, support flexible tapping/rigid tapping | |
| 1-way spindle encoder feedback, the number of spindle encoder lines can be set | |
| Tool function | Tool length compensation (tool offset): 16 groups |
| Tool wear compensation: 16 groups | |
| Tool life management: 16 groups | |
| Tool setting method: fixed point tool setting, trial cutting tool setting, back to reference point tool setting, automatic tool setting, coordinate recording function | |
| Tool offset execution mode: modify coordinate mode, tool movement mode | |
| Accessibility | Special M codes (M00, M01, M02, M30, M98, M99) |
installation size
Previous page
HB280-AS
Next page
C
BOLONG
ontact us
Welcome to the official website of Bolong Machine Tools.If you are interested in our products and services, please contact us, we will be happy to serve you.
National free service hotline:
Add: No. 98, Lane 738, Jinqing Avenue West, Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Tel: 0576-82871588
Fax: 0576-82882958
Web: http://www.tzbolong.cn
Quick navigation:
QR Code:
Client QR Code
WeChat QR code
Copyright @ 2023 Taizhou Bolong Machine Tool Equipment Co., Ltd. All Rights Reserved Powered by www.300.cn
